落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高感应电流小感应电流实验仪(耐电弧放电实验仪)-(运算机管理)

High voltage low current tester (arc resistance tester) - (computer control)

物产品分类:耐电弧试验机

Product name: electric arc resistance tester

好产品具体型号:NDH-A

Product model: NDH - A

提供条件:GB/T 1411-2002《液体耐压材质耐高降低感应电流电孤释放的测试》(相等IEC  61621-1997)及ASTM D495等规格的需要制定开发的,并适合IEC 149、UL 746A等试验装置手段

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

首要实用使用范围及能力:

本检验机是根据采主要用于交流电动机、电气产品和挂式电气产品等产业的电工维修用朔料、不饱和树脂原料胶和隔热漆等隔热原料的耐脉冲放电效能评判,主主要用于无水硫酸铜隔热原料如:朔料、pet薄膜、不饱和树脂原料、黑云母、瓷质、有机玻璃、隔热油、隔热漆、厚纸板等媒介的耐脉冲放电效能测试图片;

本经过多次试验发现机由运算机调控行驶,可不可以表明在当下试验的情形及试验時间,试验完结后并永久保存在当下试验统计资料,并可印刷.原则實驗评估报告。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为前后三合一的结构,下面为操控系统性,上侧为冲击试验仪。

2 本物料用到*新智能化的控制技木,按照的选择流程(IEC或ASTM)可智能对其进行试验报告,并在PC手机上界面显示实验过程中和结论。

3 **稳定性好,抗打扰力强,测量高精度大。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断精力不确定度:不大于 ±10ms

2 调压器出水量:2kVA

3 额定值耐压试验电流:12.5kV

4 试验装置电流值精准度:±3%

5 电流值的控制精确:±10%  直流电预估准确度:1.5%

6 电极片对试件材料经济压力:(0.5±0.05)N

7 金属电极建筑材料:钨棒

8 电级相应:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 运用周围环境工作温度:(23±2)℃

10 用生态环境水分子含量:(50±5)%

11 电原:220V±5%  50Hz  10A

12 校正    工艺:   新国标/美标/10 mA 间断性/20 mA 陆续/30 mA连着/40 mA持续

13 检测方式正确:

过程段

弧光瞬时电流

mA

焊弧通断时段s

各程序流程段持续保持日子s

疲劳试验总时间段s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

间断通

60

240

5

20

维持通

60

300

6

30

维持通

60

360

7

40

多次通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

序号顺序

分类

总量

微信备注名

01

耐脉冲测试方法仪

一套

 

02

参比电极体统

一整套

 

03

探针支架

五套

 

04

电通信电缆

这套

 

05

的接地放**

两支

 

06

瞬时电流毫安表

这台

 

07

租赁测控应用

这套

 

08

样品架

一套

 

09

工业时间标准的块

2块

 

10

方向原则块

2块

 

11

卫浴陶瓷片

2片

 

12

喷墨网页uv平板机

1台

的品牌

13

测算机

1台

茶叶品牌

14

选用阐明书

1份

 

15

通过率证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 产品的型号规格:

NDH-A    耐电孤经过多次实验发现仪-微机把控好

NDH-B    耐弧光测试仪-触碰屏调整

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 机械鲁工 机械鲁工